Timber / Logs
We export Logs and Timbers mainly from African continent. Few of our regular exported wood is listed below;
We offer our clients a class range of genuine Ghana Teak Wood widely used in marine applications, furniture, and constructions.
Flat steel Products
- Hot Rolled Coils / Sheets / Plates
- Cold Rolled Coils / Sheets (Bright and Black Annealed)
- Coated Steel Coils / Sheets / Corrugated Sheets / Profile Sheet
Long Steel Products
- Wire Rods
- Steel Billets
- Reinforcing Bar or Deformed Bars (Merchant Bars)
Flat steel Products
1. Hot Rolled Coils / Sheets / Plates
Hot-rolled coil is produced from semi-finished products, which are reduced to certain thicknesses by rolling and annealing and wound into a roll. Hot-rolled steel is used in e.g. for the manufacture of pipes, steel doors and tanks or is further processed into cold-rolled steel.
2. Cold Rolled Coils / Sheets (Bright and Black Annealed)
Cold-rolled steel refers to low-carbon steel produced by a “cold rolling” method and processed at near normal room temperatures. Cold-rolled steel offers superior strength and machinability. Cold-rolled steel sheets are commonly used for engineered products where tight tolerances, concentricity, straightness and coated surfaces are required.
3. Coated Steel Coils / Sheets / Corrugated Sheets / Profile Sheet
Coated Steel is basically the product of continuous and highly automated industrial process for efficiently coating coils of metal with alloys like zinc, Aluzinc and polyester based paint. We deal in the following coated steel products;
Paint: 12mic to 25mic)
i. Hot-Dipped Galvanized Coils:
It is produced by a process called galvanization where the iron and steel is coated with zinc, which alloys with the surface of the base metal when immersing the metal in a bath of molten zinc at a temperature of around 840 °F (449 °C).
ii. Hot-Dipped Galvalume Coils:
Galvalume is a product of continuous and highly automated process for efficiently coating the coil surface with an alloy which is a combination of Aluminium (55%) and Zinc (43.5%) and a little amount of Silicon and other elements.
iii. Pre-painted galvanized or galvalume coils:
Pre-painted galvanized or galvalume coils, also known as pre-coated steel coil, coated steel, color coated steel etc., typically with a hot dip zinc and or hot dip aluzinc coated steel substrate. The term is an extension of GI or GL which is a traditional abbreviation for Galvanized Iron and Galvalume respectively.
Long steel Products
1. Wire Rods
Wire Rods are semi-finished product made out of billets by drawing process under hot rolling temperature. They are majorly used in fastner industries, roofing nail manufacturing and wire drawing.
2. Steel Billets
Steel Billets are also known as square bars are a semi-finished raw material that is used in manufacturing rebar, wire rod, and also seamless pipes. (from round billets)
3. STEEL DEBARS:
Rebar (short for reinforcing bar), known when massed as reinforcing steel or reinforcement steel, is a steel bar or mesh of steel wires used as a tension device in reinforced concrete and reinforced masonry structures to strengthen and aid the concrete under tension. Concrete is strong under compression but has weak tensile strength. Rebar significantly increases the tensile strength of the structure. Rebar’s surface is often “deformed” with ribs, lugs, or indentations to promote a better bond with the concrete and reduce the risk of slippage. The most common type of rebar is carbon steel, typically consisting of hot-rolled round bars with deformation patterns. Other readily available types include stainless steel and composite bars made of glass fiber, carbon fiber, or basalt fiber. The steel reinforcing bars may also be coated in an epoxy resin designed to resist the effects of corrosion mostly in saltwater environments, but also land-based constructions. Bamboo has been shown to be a viable alternative to reinforcing steel in concrete construction. These alternate types tend to be more expensive or may have lesser mechanical properties and are thus more often used in specialty construction where their physical characteristics fulfill a specific performance requirement that carbon steel does not provide. Steel and concrete have similar coefficients of thermal expansion, so a concrete structural member reinforced with steel will experience minimal differential stress as the temperature changes
Through strategic stakes and long-term sourcing agreements with key manufacturers for incessant off-take, we have ensured reliable supplies. This, combined with our flexibility, financial prowess and remarkable control over logistics makes us one of the most dependable and reliable fertilizer traders in the international arena.
We are one of the leading movers of various agro products like Rice, Soya bean, Cashewnuts, Coco beans etc, recording volumes of more than 1.5million MT. We mainly supply to consumers in Middle east, Asia, China and Africa. Our key sourcing markets includes Africa, Middle East and Myanmar where we own and operate processing plants.
Soybean or Soya bean :
We have our own processing plant in Myanmar and exports to Asian and African markets in big volumes.